Detailed Product Description

                              Neutral silicone sealant  Doors & Windows

Product introduction

1. One-component, neutral curing, convenient

2. Excellent construction performance

4. Have good compatibility with all the silicone sealant

Application

Applied to aluminum alloy doors and windows, plastic doors and windows, steel doors and windows and most construction materials.

Products colors: translucent, white, black

Using Method

1. Before using, it must be tested the compatibility and cohesive force between the sealant and

    the material.

2. The surface must be clean and dry;,it will be operated after confirm the eligibility .

3. The interface which need to be covered with adhesive tape to cut nozzle, take the plastic

    mouth on, and put it into the glue gun, then glue sealant and strickle surface flat

4  Rob out the remainder with the flannelette and remove the adhesive tape.

5. Dont touch the interface within 48 hours.

Use Constraints

1.  Dont use it on the wet or frosty surface;

2.  Dont use it in the windtight location;

3.  Dont meet the surface of food directly;

4.  Dont use it on the interface which is long-term soaking and burying in the ground;

5.  Dont use it on the newly-built(within two monthes after built)beton or the sand lime surface;

6.  Dont use it on the location where the temperature is under 5,the humidity is less than 20%

     or the surface temperature is more than 40%.

Attention

1. To avoid repeated and prolonged skin contact

2. Please in a well-ventilated environment

3. Wash with clean water in case of splashed into the eyes and go to the hospital

4. Under the different circumstances between temperature and humidity, it is the normal

    situation if the volume of product arises the change of ±9ml.

5. It can be transported as the non-dangerous goods.

Store in a cool, dry place below 27. Use within 9months.